GE Industrial Solutions 6KCV300DVN - Manual (Page 10)

GEI-100431
—————— INTRODUCTION ——————
1 10
1.2 DEVICENET GENERAL DESCRIPTION
DeviceNet is a profile of communication for industrial systems based on CAN.
As protocol CAN (ISO 11898) is used CAN2.0A with the 11 bit identifier.
The 6KCV300DVN board is developed as “Slave UCMM Capable Device”
for operating only in “Predefined Master/Slave Connection Set”.
The data transfer is carried out cyclically; the Master unit reads the data supplied
by the Slaves and writes the Slave reference data; the Baud Rate supported by
the 6KCV300DVN board are:
- 125 kbit
- 250 kbit
- 500 kbit .
The physical support is given by the RS485 serial line; a maximum of 64
Slaves can be connected to the Bus.