GE Industrial Solutions IEMi - Manual (Page 18)

3.2.1 Metering mode
The metering mode is entered any time the
metering button is pressed.
While in this mode the LCD will display a series
of screens containing metering information.
In this mode the buttons perform the following functions:
metering Scrolls forward to the next screen.
alarms Abandons the metering mode and enters the alarms mode.
parameters Abandons the metering mode and enters the parameters mode.
+ Scrolls forward to the next screen.
– Scrolls backward to the previous screen.
ok ys the main screen for this mode. Displa
LOAD ON UPS
Load = 159.85kVA
Percentage = 80%
INVERTER OFF (IEMi)
metering
alarms
parameters
+
–
ok
Status Load screen
This screen displays:
• The Load level in kVA (for RPA: only this unit).
• The Load level as a percentage of the nominal
rated Load (for RPA: only this unit).
The source of the power supplied to the Load.
Modifications reserved Page 18/24
OPM_OPT_IEM_iXX_XXX_XGB_V010.doc User Manual IEMi - Intelligent Energy Management integrated