GE Industrial Solutions IEMi - Manual (Page 4)

Modifications reserved Page 4/24
OPM_OPT_IEM_iXX_XXX_XGB_V010.doc User Manual IEMi - Intelligent Energy Management integrated
1 SAFETY RULES
With this document, GE gives to the user all the necessary information about the correct
installation and connection with the UPS units.
Please carefully read this User Manual before installing or operating the equipment.
If any problems are encountered with the procedures contained in this User Manual, please
contact the nearest Service Centre before you proceed.
All UPS installation, maintenance and service work should be performed by qualified service
personnel only.
KNOWLEDGE and FULL compliance of the safety instructions and the warnings
contained in this manual are
THE ONLY CONDITION
to avoid any dangerous situations during installation, operation, maintenance work,
and to preserve the maximum reliability of the UPS system.
NOTE !
“IEMi - Intelligent Energy Management integrated” is available if
enabled at the factory.
Otherwise, only a GE GLOBAL SERVICES FIELD ENGINEER can make
it available on field installations.
In this case, the site upgrade may require the COMPLETE
SHUTDOWN of the UPS system.
Please refer to the “Safety Rules” included in the “User Manual” &
“Installation Guide” of the UPS.
Please read carefully the UPS “User Manual” & “Installation Guide” before
installing or operating the equipment.
If any problems are encountered with the description of this installation
guide, please contact the nearest Service Centre before proceeding.
GE
Refuses any responsibility in case of non-observance,
unauthorised alterations or improper use of the
delivered equipment.