Asus M2N-LR/SATA - Manual (Page 31)

2-2 Chapter 2: Hardware information
2.4 System memory
2.4.1 Overview
The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory
Modules (DIMM) sockets.
A DDR2 module has the same physical dimensions as a DDR DIMM but has a
240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched
differently to prevent installation on a DDR DIMM socket.
The figure illustrates the location of the DDR2 DIMM sockets:
Channel Sockets
Channel A DIMM_A1 and DIMM_A2
Channel B DIMM_B1 and DIMM_B2
2.4.2 Memory configurations
You may install 64 MB, 128 MB, 256 MB, 512 MB, or 2 GB unbuffered ECC DDR2
DIMMS into the DIMM sockets using the memory configurations in this section.
• For dual-channel configuration, the total size of memory module(s) installed
per channel must be the same for better performance (DIMM_A1+DIMM_
A2=DIMM_B1+DIMM_B2).
• Due to chipset resource allocation, the system may detect less than 8 GB
of system memory when you installed four 2 GB DDR2 memory modules.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from the
same vendor. Refer to the DDR2 800 Qualified Vendors List at the ASUS
web site.
M2N-LR/SATA
®
M2N-LR/SATA 240-pin DDR2 DIMM Sockets
DIMM_A2
DIMM_B1
DIMM_A1
DIMM_B2
112 Pins 128 Pins