Asus M2N-LR/SATA - Manual (Page 38)

ASUS M2N-LR Series 2-
4. VGA Graphics controller setting (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard ATI ES1000
graphics controller.
5. CPU fan pin selection (3-pin FM_CPU1, FM_CPU2)
These jumpers allow you to connect either a 3-pin or 4-pin fan cable plug
to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these jumpers to
pins 1-2 if you are using a 3-pin fan cable plug, or to pins 2-3 if you are using
a 4-pin plug.
M2N-LR/SATA
®
M2N-LR/SATA VGA Setting
VGA_EN1
Enable
(Default)
Disable
2 1 2 3
M2N-LR/SATA
®
M2N-LR/SATA CPU Fan Connectors
GND
FANPWR2
FANOUT4
CPU_FAN1
GND
FANPWR2
FANOUT4
CPU_FAN2