Asus P8Q77-M User Manual
Motherboard
Advertising
Table of contents
Document Outline
- Safety information
- Chapter 1
- Product introduction
- Chapter 2
- BIOS information
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 CPU bus speed : DRAM speed ratio mode [Auto]
- 2.4.2 Memory Frequency [Auto]
- 2.4.3 EPU Power Saving Mode [Disabled]
- 2.4.4 GPU Boost [OK]
- 2.4.5 DRAM Timing Control
- 2.4.6 CPU Power Management
- 2.4.7 CPU Voltage [Offset Mode]
- 2.4.8 DRAM Voltage [Auto]
- 2.4.9 VCCIO Voltage [Auto]
- 2.4.10 VCCSA Voltage [Auto]
- 2.4.11 CPU PLL Voltage [Auto]
- 2.4.12 PCH Voltage [Auto]
- 2.4.13 Load-Line Calibration [Auto]
- 2.5 Advanced menu
- 2.5.1 Trusted Computing
- 2.5.2 CPU Configuration
- 2.5.3 PCH Configuration
- 2.5.4 SATA Configuration
- 2.5.5 System Agent Configuration
- 2.5.6 Intel TXT(LT) Configuration
- 2.5.7 AMT Configuration
- 2.5.8 USB Configuration
- 2.5.9 Onboard Devices Configuration
- 2.5.10 APM
- 2.5.11 Serial Port Console Redirection
- 2.5.12 Network Stack
- 2.6 Monitor menu
- 2.7 Boot menu
- 2.7.1 Bootup NumLock State [On]
- 2.7.2 Full Screen Logo [Enabled]
- 2.7.3 Wait for ‘F1’ If Error [Enabled]
- 2.7.4 Option ROM Messages [Force BIOS]
- 2.7.5 Setup Mode [EZ Mode]
- 2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy]
- 2.7.7 PCI ROM Priority [Legacy ROM]
- 2.7.8 Boot Option Priorities
- 2.7.9 Boot Override
- 2.8 Tools menu
- 2.9 Exit menu
- Appendices