Asus P8Q77-M - Manual (Page 55)

Chapter 2: BIOS information 2-11
2.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Forces a DDR3 frequency slower than the
common tCK detected via SPD.
→← : Select Screen
↑↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F6: ASUS Ratio Boost
F10: Save ESC: Exit
F12: Print Screen
EFI BIOS Utility - Advanced Mode
Target DRAM Speed : 1333MHz
CPU Bus speed : DRAM speed ratio mode Auto
Memory Frequency Auto
EPU Power Saving MODE Disabled
> GPU Boost
> DRAM Timing Control
> CPU Power Management
CPU Voltage 1.128V Offset Mode
Offset Mode Sign +
CPU Offset Voltage Auto
DRAM Voltage 1.610V Auto
VCCIO Voltage Auto
VCCSA Voltage Auto
CPU PLL Voltage Auto
PCH Voltage 1.050V Auto
Load-Line Calibration Auto