Hardware setup – Asus TR-DLSR User Manual
Page 18
18
ASUS TR-DLSR User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
Clear RTC RAM (R323)
These two solder points allow you to clear the RTC RAM in CMOS. You can clear
the CMOS memory of date, time, and system setup parameters by erasing the CMOS
Real Time Clock (RTC) RAM. The RAM data that include system setup information,
such as system passwords, is powered by the onboard button cell battery.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Remove the battery.
3.
Short the solder points for a few seconds.
4.
Re-install the battery.
5.
Plug the power cord and turn ON the computer.
6.
Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter CMOS data.
TR-DLSR
TR-DLSR Clear RTC RAM
Short solder points
to Clear CMOS
R323