Asus TR-DLSR - Manual (Page 79)

ASUS TR-DLSR User’s Manual 79
5. OS Driver Installation
5. Driver Installation
Windows 2000
2. Microsoft Windows 2000 Server
I. LSI SCSI Driver Installation
LSI Logic and Microsoft provide miniport drivers, called SYM_HI.SYS that are
bundled with Windows 2000 along with non-bundled drivers LSI_U3.SYS. These
miniport drivers complete the path to a LSI controller or processor with an optional
SDMS SCSI BIOS. The next sections describe these drivers and their installation.
Therefore, user only need to load the driver manually when the CUR-DLS M/B has
build-in with LSI SYM53C1010 SCSI controller. As for LSI SYM53C896 SCSI
controller, it’s always bundled in Windows 2000 system.
A. Preparing a LSI Driver Diskette
The drivers are located on the ASUS Driver Support CD at:
\SDMS\DRIVERS\WIN2K\XXX2K\I386\WINNT\MINIPORT
where XXX2K represents the specific Windows NT subdirectory. For example, the
LSI_U3.SYS driver is located in the Ultra32K subdirectory. Copy all the files starting
from the I386 subdirectory through the MINIPORT subdirectory to the root directory
of a clean floppy diskette. Use this LSI driver diskette during installation. (-or-)
Use the self-extracting image files for Windows 2000 drivers. For the SYM_HI.SYS
driver, the executable file is located here:
\SDMS\DISKIMAG\W2K_HI
For the LSI_U3.SYS driver, the executable file is located here:
\SDMS\DISKIMAG\W2K_U3
B. New System Installation
The SYM_HI.SYS drivers are bundled with Windows 2000. These drivers support
the SYM53C8XX family of LSI controllers. The LSI_U3.SYS drivers are non-
bundled drivers. The LSI_U3.SYS driver supports the SYM53C1010 LSI controller.
To install Windows 2000 on a new system, the system BIOS must support booting
from a CD-ROM. LSI BIOS settings may need to be changed to allow CD-ROM
booting.
1. Start the Windows 2000 installation by booting from the Windows 2000 CD-
ROM.