Asus TR-DLSR - Manual (Page 81)

ASUS TR-DLSR User’s Manual 81
5. OS Driver Installation
5. Driver Installation
Windows 2000
11. In some cases, a message will state that this driver is not digitally signed. This
message informs the user that a non-signed driver is being installed. Either
click No to cancel the installation if the non-signed driver is not desired or
click Yes to continue the installation.
Note: Drivers are digitally signed by the Microsoft Windows Hardware Quality
Lab (WHQL). Due to the delay between the general customer release by LSI
Logic of Windows drivers and the completion of WHQL testing, some drivers
that are distributed with adapters or downloaded from the LSI Logic web site
at www.lsilogic.com may not be digitally signed.
12. The system will load the driver from the LSI driver diskette. A message box
may appear indicating that the target (existing) driver is newer than the source
(upgrade) driver. Click No to cancel the driver upgrade at this point or click
Yes to continue the installation.