Asus RS724Q-E6/RS12 - Manual (Page 35)

2-15 ASUS RS720Q-E6/RS12, RS724Q-E6/RS12
2.6 Cable connections
Pre-connected system cables
1. 20-pin proprietary power connector (from power supply to motherboard)
2. 4-pin proprietary power connector (from power supply to motherboard)
3. System fan connectors (from motherboard FRNT_FAN1, FRNT_FAN2,
FRNT_FAN3 and FRNT_FAN4 to system fans)
4. Panel connector (from motherboard to front I/O board)
5. SATA connectors (from motherboard to SATAII/SAS backplane board)
6. Auxiliary panel connector (from motherboard to front I/O board)
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 4 for detailed information on the connectors.
1
2
3 3
3
4
5
6
3
RS720Q-E6/RS12 (Z8NH-D12) RS724Q-E6/RS12 (Z8PH-D12 SE/QDR)
1
2
3 3
3
4
5
6
3