Asus RS724Q-E6/RS12 - Manual (Page 44)

Chapter 3: Installation options 3-2
3.1 Installing friction rail kit items
Your friction rail kit package contains:
•
Two pairs of rack rails (for the rack)
• Nut-and-bolt type screws and one pair of server latches
Nuts and screws Front rack rails Rear rack rails
3.1.1 Attaching the fixing latches to the server
Refer to the figures below for the locations to attach the two fixing latches to the
two sides of the server with four screws.
1. Remove the two screws on the side of the server chassis.
2. Secure the fixing latch with the two screws you removed in step 1.
3. Repeat step 1 to 2 to secure another fixing latch to the other side of the
server.
2
1