Asus GigaX2124X - Manual (Page 46)

GigaX Series L2 Managed Switch User’s Guide
46
4.5.8 Static Addresses
You can add a MAC address into the switch address table. The MAC address
added by this way will not age out from the address table. We call it static
address.
MAC Address: enter the MAC address
VLAN ID: enter the VLAN ID that the MAC belongs
Port Selection: select the port which the MAC belongs
Discard: you can do packet filtering when the MAC address appears in
the packets as destination address, source address, or either of them.
Click on when you create a new static MAC address by the above
information. Then you will see the new added entry shows in the address
window. You can remove the existed address by selecting the entry with the
mouse, then clicking on . The button updates the existed
MAC address entries. Click to save effective. Click to refresh
the settings to current value. To make the configuration effective, please go to
“save configuration” page, then click .
Figure 24. Static Address