Asus GigaX2124X - Manual (Page 79)

GigaX Series L2 Managed Switch User Guide
79
[Reload]
Restores the previous saved settings from configuration file.
CLI command : l2 rate retrieve
[Aging Time]
User can set the ARL (Address Resolution Logic) entries aging time by setting
the aging time value.
CLI command : l2 arl age [aging time value]
[Query by Port]
ARL entries existed in ARL table can be queried according to port number.
CLI command : l2 arl port <port number>
[Query by VLAN ID]
ARL entries existed in ARL table can be queried according to VLAN ID.
CLI command : l2 arl vlan <vlan id>
[Query by MAC Address]
ARL entries existed in ARL table can be queried according to MAC address.
CLI command : l2 arl mac <mac address> [vlan id]
[MAC Address]
[VLAN ID]
[Port Selection]
[Discard] [none/source/destination/source & destination]
User can add or modify a static ARL entry by specifying a MAC address, VLAN
ID, port number, trunk ID, and discard criteria.
CLI command : l2 arl static <mac> <vlan id> <port no> <trunk id>
<discard: 0-3>