Asus AP1720-E1 - Manual (Page 115)

ASUS PC-DL Deluxe motherboard 5-13
5.4.3 Creating a RAID 0 array (Performance)
1. In the FastBuild™ utility main menu, press “1” to select Auto Setup.
The following screen appears.
2. Use the arrow keys to go to the field Optimize Array for and select
“ Performance” with the space bar. The Mode field displays “ Stripe”.
3. After making a selection, press <Ctrl-Y> to save and create a RAID 0
array.
4. Press any key to reboot the system. During the boot process, the
MBFastTrak378 BIOS checks and displays the disk array information.
Depending on the operating system you are installing, you may need
to install the RAID driver during or after the OS installation.
5. Once the array is created, use the FDISK utility to format the array as a
single hard drive.
6. After you have formatted the arrayed drives, install an operating
system (OS). The OS will treat the RAID 0 array as a single drive unit.
7. Install the RAID driver from the support CD that came with the
motherboard package.
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
[ Keys Available ]
[ Auto Setup Options Menu ]
[ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save
[ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save
Mode ........................................
Spare Drive.................................. 0
Drive(s) Used in Array....................... 2
Array Disk Capacity (size in MB)............. 8650
[ Array Setup Configuration ]
Stripe
Optimize Array for: Performance