Asus AP1720-E1 - Manual (Page 116)

5-14 Chapter 5: Driver installation
5.4.4 Creating a RAID 1 array (Security)
Creating a Security Array with New Drives
1. In the FastBuild™ utility main menu, press “1” to select Auto Setup.
5. Press N for the Create Only option. A message appears confirming that
your Security array has been created.
6. Press any key to reboot the system. During the boot process, the
MBFastTrak376 BIOS checks and displays the disk array information.
Array has been created.
<Press any key to reboot>
Do you want the disk image to be duplicated to another? (Yes/No)
Y - Create and Duplicate
N - Create Only
2. Use the arrow keys to go to the field Optimize Array for and select
“ Security” with the space bar. The Mode field displays “ Mirror”.
3. Press <Ctrl-Y> to save your selection.
4. The following message appears:
FastBuild (tm) Utility 2.00 (c) 2002-2005 Promise Technology, Inc.
[ Keys Available ]
[ Auto Setup Options Menu ]
[ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save
[ ] Up [ ] Down [ , ,Space] Change Option [ESC] Exit [CTRL-Y] Save
Mode ........................................
Spare Drive.................................. 0
Drive(s) Used in Array....................... 2
Array Disk Capacity (size in MB)............. 4000
[ Array Setup Configuration ]
Mirror
Optimize Array for: Security