6 resetting a raid to non-raid, 22 chapter 5: driver installation – Asus AP1720-E1 User Manual

Page 124

Advertising
background image

5-22

Chapter 5: Driver installation

5.5.6 Resetting a RAID to non-RAID

To reset a RAID to non-RAID structure:

1.

Select the option 3. Reset Disks to Non-RAID and press <Enter>.

2.

When a confirmation message appears, press Y to revert to non-
RAID hard disk structure.

[

DISK/VOLUME INFORMATION

]

RAID Volumes:
None defined.

Non-RAID Disks:
Port Drive Model

Serial #

Size

Status

Bootable

0 ST320413A

xxxxxxxx

18.6GB

Normal

Yes

1 ST320413A

xxxxxxxx

18.6GB

Normal

Yes

Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility

Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx

[

MAIN MENU

]

1.

Create RAID Volume

2.

Delete RAID Volume

3.

Reset Disks to Non-RaID

4.

Exit

[ ]-Select

[ ]-Select

[ESC] Exit

[ESC] Exit

[Enter]-Select Menu

[Enter]-Select Menu

Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.

[

RESET ALL DATA RAID DATA

]

WARNING: Selecting "Yes" will cause all data on any RAID disk

(RAID Volume or Other RAID Disk) to be lost.

Are you sure you want to destroy all RAID data (Y/N):

Take caution when resetting a RAID to non-RAID. Resetting all RAID
data will remove any internal RAID structures from all RAID disks!

Advertising