Asus TS300-E8-RS4-C - Manual (Page 51)

2-29 ASUS TS300-E8-RS4-C
2.9.2 Chassis footpads
The barebone server system is shipped with four footpads attached to the bottom
of the chassis for stability. You need to remove these footpads if you wish to install
the system to a server rack. For instructions on how to install the server, refer to
Chapter 3: Installation options.
To remove the footpads:
1. Lay the system chassis on its side.
2. Remove the footpad by rotating
it counterclockwise with a Philips
(cross) screwdriver.
3. Repeat steps 1 and 2 to remove
the other three footpads.
3. Remove the system fan.
4. Follow the previous instructions in reverse to reinstall the rear system fan.