Asus TS300-E8-RS4-C - Manual (Page 69)

ASUS TS300-E8-RS4-C 4-13
4. RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1–2 if you want to
use the third party software RAID Utility; otherwise, place the jumper caps to
pins 2–3 to use the Intel ® Rapid Storage Technology enterprise SATA Option
ROM Utility.
5. Platform Enviromental Control Interface Setting (3-pin PECI1)
When an ASMB7-iKVM is installed, set these to pins 2-3 for correct sensor
information of the Platform Environmental Control Interface (PECI). Set to
pins 1-2 if ASMB7-iKVM is not installed.