Asus RS100-E4/PI2 - Manual (Page 117)

ASUS RS100-E4/PI2 6-19
6.3.2 Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration
using the View/Add Configuration command.
Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight Configure, then press <Enter>.
2. Use the arrow keys to select View/Add Configuration, then press
<Enter>.
3. The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the
RAID set, then press <SpaceBar>. When selected, the drive indicator
changes from READY to ONLIN A[X]-[Y], where X is the array number,
and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of
the screen.