3 attaching the rails to the rack – Asus RS100-E4/PI2 User Manual
Page 37
Advertising
3-3
ASUS RS100-E4/PI2
3.3 Attaching the rails to the rack
To attach the rack rails:
1. Release the inner rail on each rail set, by sliding the latch to direction as
indicated by arrow. When released, pull out the inner rail.
Latch
2. Locate the four screw holes on
each front-side of the chassis.
Select one side for installation.
3. Get one rack ear and match the
four screw holes to the screw
holes on the chassis. Orient the
rack ear as shown.
4. Secure the rack ear to the chassis
with four screws.
5. Repeat steps 2 - 4 to attach the
other rack ear.
Advertising