Asus RS100-E4/PI2 - Manual (Page 28)

Chapter 2: Hardware setup 2-12
2.5 Replaceable components
You may need to replace defective components or remove previously
installed system components when installing or removing system devices.
This section tells how to install or remove the following components:
1. System blower
2. Serial ATA hard disk drive
3. Optical disk drive
2.5.1 Installing the system blower
To install the system blower:
1. Locate the system blower plate on
the chassis.
2. Align the nozzle of the system
blower towards the heatsink.
Heatsink System blower nozzle
System blower
System blower plate