Asus RS160-E4/PA4 - Manual (Page 104)

5-34 Chapter 5: BIOS setup
Scroll down to display more items:
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Full fan speed will
be started when the
temperature reaches the
selected target value.
Hardware Monitor
FAN2 6505RPM
FAN3 6727RPM
FAN4 N/A
FAN5 N/A
FAN6 6440RPM
FAN7 6545RPM
FAN8 6221RPM
FAN9 6601RPM
FAN10 6560RPM
VCORE0 Voltage 1.25 V
VCORE1 Voltage N/A
PhoenixBIOS Setup Utility
Advanced
CPU1/2.Domain.0/1.Temperature.(CPU1/2.Target.Temperature),.
SYSTEM1/2.Temperature,
These fields show the auto-detected values and are not user-configurable. If no fan
is installed, the field shows 0 RPM.
Smart.Fan.Control.[Smart.Fan.II]
Allows you to disable or configure the Smart Fan feature.
Configuration options: [Disabled] [Smart Fan] [Smart Fan II]
CPU1/2.Domain.0/1.Target.Temperature.
(CPU1/2.Target.Temperature)
Allows you to set the target CPU temperature at which the CPU fan will start
running if the fan is not yet turned on. Configuration options: [54 °C]~[76 °C]
SYSTEM1/2.Target.Temperature
Allows you to set the target sytem temperature at which the system fan will start
running if the fan is not yet turned on.
Configuration options: [49 °C]~[70 °C]
FAN1~10
These fields show the auto-detected values and are not user-configurable.
VCORE0/1.Voltage
These fields show the auto-detected values and are not user-configurable.