Asus RS160-E4/PA4 - Manual (Page 106)

5-36 Chapter 5: BIOS setup
The following items appear only if you set the Com.Port.Address item to
[On-board COM1 port] or [On-board COM2 port].
Baud.Rate.[57.6K]
Allows you to enable the specified baud rate.
Configuration options: [300] [1200] [2400] [9600] [19.2K] [38.4K] [57.6K] [115.2K]
Console.Type.[VT-UTF8]
Allows you to enable the specified console type.
Configuration options: [VT100] [VT100, 8bit] [PC-ANSI, 7bit] [PC ANSI] [VT100+]
[VT-UTF8] [ASCII]
Flow.Control.[None]
Allows you to select the flow control for console redirection.
Configuration options: [None] [XON/XOFF] [CTS/RTS]
Console.connection.[Direct]
Allows you to select the console connection. [Direct] indicates that the console is
connected directed to the system. [Via modem] indicates that a modem is used to
connect. Configuration options: [Direct] [Via modem]
Continue.C.R..after.POST.[On]
Set this item to [On] if you want console redirection to continue after the operating
system has loaded. Configuration options: [Off] [On]
#.of.video.pages.to.support.[1]
Allows you to set the number of video pages to allocate for console redirection
when the video hardware is not available. Press <-> or <+> to set the value, or
enter the value using the numeric keypad. Configuration options: [1] ~ [8]