Asus RS160-E4/PA4 - Manual (Page 108)

5-38 Chapter 5: BIOS setup
5.6 Security menu
Supervisor.Password.Is.[Clear].
User.Password.Is.[Clear]
These fields allow you to set passwords:
To set a password:
1. Select an item then press <Enter>.
2. When prompted, type in a password using a combination of a maximum of
eight (8) alpha-numeric characters, then press <Enter>.
3. Confirm the password by typing the exact characters again, then press
<Enter>. The password field setting is changed to Set.
To clear the password:
1. Select the item
Set.Supervisor.Password or Set.User.Password,
depending on which password you want to clear. Press <Enter>.
The following message appears:
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Supervisor Password
controls access to the
setup utility.
Supervisor Password Is: Clear
User Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Password Check [Setup]
Password Lock Mode [Disabled]
Removable Device Boot [Enabled]
Flash Write [Enabled]
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Supervisor Password
controls access to the
setup utility.
Supervisor Password Is: Set
User Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Password Check [Setup]
Password Lock Mode [Disabled]
Removable Device Boot [Enabled]
Flash Write [Enabled]
PhoenixBIOS Setup Utility
Main Advanced Server Security Boot Exit
Set Supervisor Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password
[ ]