Asus M2NPV-VM - Manual (Page 92)

2-42 Chapter 2: BIOS setup
ASUSTek O.C. Profile Utility B311
Current CMOS Update CMOS
BOARD: M2NPVVM
VER: 0122
DATE: 04/24/2006
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: C:\M2NPVOC
WIN98SE <DIR>
NETTERM <DIR>
DOCUME”1 <DIR>
PROGRA”1 <DIR>
SYSTEM”1 <DIR>
M2NPVVM <DIR>
RECYCLED <DIR>
TEST-REB <DIR>
BOOTFONT.BIN 213830 2001-09-05 20:00:00
[Enter] Select [Y] Yes [N/Esc] No [Left/Right]: Switch
Note
CMOS backup is done! Press any key to Exit.
The BIOS file will be saved as “xxx.CMO”.
2.7.2. ASUS.EZ.Flash.2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to confirm your choice. Please see page 2-6, section 2.1.3 for
details.
[Tab] Switch [Up/Down/Home/End] Move
ASUSTek EZ Flash 2 BIOS RROM Utility B311
Current ROM Update ROM
BOARD: M2NPV VM
VER: 0122
DATE: 04/24/2006
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: C:\M2NPVOC
[Enter] Select [S] Save [ESC]Exit
[Tab] Switch [Up/Down/Home/End] Move
Note
WIN98SE <DIR>
NETTERM <DIR>
DRIVERS <DIR>
RECYCLED <DIR>
WUTEMP <DIR>
NEWFOL~1 <DIR>
INSTALL <DIR>
TEST-REB <DIR>
MSDOWNLD.TMP <DIR>
FLASH TYPE: Winbond W39V080A 8Mb LPC
WIN98E <DIR>