Asus P9D-I - Manual (Page 142)

6-4 Chapter 6: Driver installation
8. Select YES from the following warning message then press <Enter>.
WARNING !!!
NO YES
)
DO YOU WANT TO CONTINUE ?
ALL DATA ON THE FLOPPY DISKETTE WILL BE DELETED !!
9. On the following Important message, select YES if an ASMB7 is installed, otherwise
select NO, then press <Enter>.
NO YES YES
<Important>
Please ensure ASMB7-iKVM is well installed on the
motherboard.
10. Insert the formatted diskette into the disk drive and press <Enter> to write the image to
the disk.
11. Press any key to continue when prompted.
The Create Driver Diskette Menu appears after the creation of the diskette is finished.
To create a RAID driver disk in Windows ® environment:
1. Start Windows ® .
2. Place the motherboard support DVD into the optical drive.
3. Go to the Make disk menu, then select the type of RAID driver disk you want to create.
4. Insert a floppy disk into the USB floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
To create a RAID driver disk in Red Hat ® Enterprise Linux ® server environment
1. Insert a blank formatted high-density floppy disk to the USB floppy disk drive.
2. Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy disk from
the following path in the support DVD:
For LSI MegaRAID Driver
\Drivers\C22x LSI RAID\Driver\makedisk\Linux
3. Eject the floppy disk.