Asus WL-320gE - Manual (Page 18)

Chapter 2 - Hardware Installation
2. Hardware
18 ASUS 802.11g Access Point
4. Attach one end of the AC power adapter, included in the product package,
to the back of the ASUS 802.11g AP and the other end to a power
outlet.
2.2 Wall Mounting Option
The ASUS WL-320gP Access Point is designed to sit on a raised flat surface
like a file cabinet or a book shelf. The unit may also be converted for
mounting to a wall or ceiling.
Follow these steps to mount the ASUS
802.11g WLAN AP to a wall:
1. Look on the underside for the two
mounting hooks.
2. Mark two upper holes in a flat
surface.
3. Tighten two screws until only 1/4” is
showing.
4. Latch the hooks of the ASUS WL-320gP onto the screws.
Note: Readjust the screws if you cannot latch the Access Point onto
the screws or if it is too loose.
Note: Use the Access Point only with the power adapter supplied in
the product package. Using another power supply may damage the
Access Point.
The Power LED on the front of the Access Point will light up when the unit
is powered ON. In addition, the green Link LED will turn ON to indicate
that the Access Point has a physical Ethernet network connection.