Asus WL-320gE - Manual (Page 34)

3. Software
3 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
3.7.3 Access Control
Note: Click the “Finish” button to save your new settings and restart
the ASUS 802.11g AP or click “Save” and restart later.
To add security, the ASUS 802.11g AP has the ability to only associate with
or not associate with wireless mobile clients that have their MAC address
entered into this page.
The default setting of “Disable” will allow any wireless mobile client to
connect. “Accept” will only allow those entered into this page to connect.
“Reject” will prevent those entered into this page from connecting.
Adding a MAC Address
To add a MAC address, enter the 12 hexadecimal characters into the white box
next to “MAC Address:” and click the Add button. The MAC address will
be placed in the control list below. Only a total of 31 MAC addresses can
be entered into this page so determine which will be the lesser; those you
wish to accept or those you wish to reject and click the appropriate “MAC
Access Mode”.
Pull down menu items:
Disable (no info required)
Accept (need to input information)
Reject (need to input information)