Asus WL-320gE - Manual (Page 37)

3. Software
ASUS 802.11g Access Point 37
Chapter 3 - Software Configuration
Access Point
another RTS/CTS handshake is completed. Enable RTS/CTS by setting a
specific packet size threshold. The default value (2347) is recommended.
DTIM Interval (1-255) – DTIM (Delivery Traffic Indication Message) is
a wireless message used to inform clients in Power Saving Mode when the
system should wake up to receive broadcast and multicast messages. Type
the time interval in which the system will broadcast a DTIM for clients in
Power Saving Mode. The default value (3) is recommended
Beacon Interval (1-65535) – This field indicates the time interval
in milliseconds that a system broadcast packet, or beacon, is sent to
synchronize the wireless network. The default value (100 milliseconds) is
recommended.
Enable Frame Bursting? – This field allows you to enable frame-bursting
mode to improve performance with wireless clients that also support frame-
bursting.
Radio Power – Radio Power can be set between 1 to 84 but the default
value is recommended..