Asus WL-320gE - Manual (Page 26)

3. Software
26 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
3.6 Quick Setup
Click Next to enter the Quick Setup page. Follow the
instructions to setup the ASUS 802.11g AP. Tips are given
when you move your cursor over each item.
3.6.1 Configure Wireless Interface
First step to set your wireless interface
is to give it a name, called SSID.
In addition, if you would like to
protect transmitted data, please select
Security Level as Medium or High.
Selecting Medium allows only those
users who use the same WEP key to
connect to this access point and to
transmit data with 64-bit or 128-bit
WEP encryption. Selecting High
allows only those users who use the
same WPA pre-shared key to connect
to this access point and to transmit
data with TKIP encryption.
If you would like to perform other
settings, click an item on the menu
to reveal a sub menu. Follow the
instructions to setup the ASUS
802.11g AP. Tips are given when you
move your cursor over each item.