Asus Z9NH-D12 - Manual (Page 99)

ASUS Z9NH-D12 Series 4-33
Serial Port for Out-of-Band Management/ Windows Emergency
Management Services (EMS)
Console Redirection [Disabled]
Enables or disables the console redirection feature.
Configuration options: [Disabled] [Enabled]
Console Redirection Settings
Out-of-Band Mgmt Port [COM1]
Microsoft Windows Emergency Management Services (EMS) allow for
remote management of a Windows Server OS through a serial port.
Configuration options: [COM1] [COM2]
Terminal Type [VT-UTF8]
Microsoft Windows Emergency Management Services (EMS) allow for
remote management of a Windows Server OS through a serial port.
Configuration options: [VT100] [VT100+] [VT-UTF8] [ANSI]
Bits per second [115200]
Microsoft Windows Emergency Management Services (EMS) allow for
remote management of a Windows Server OS through a serial port.
Configuration options: [9600] [19200] [57600] [115200]
Flow Control [None]
Microsoft Windows Emergency Management Services (EMS) allow for
remote management of a Windows Server OS through a serial port.
Configuration options: [None] [Hardware RTS/CTS] [Software Xon/Xoff]
The following item appears only when you set Console Redirection to
[Enabled].
Legacy OS Redirection Resolution [80x24]
Configures the number of rows and columns supported on legacy OS.
Configuration options: [80x24] [80x25]
Putty Keypad [VT100]
This allows you to select FunctionKey and KeyPad on Putty.
Configuration options: [VT100] [LINUX] [XTERMR6] [SC0] [ESCN] [VT400]
Redirection After BIOS POST [Always Enable]
This settings specify that if BootLoader is selected then Legacy Console
Redirection is disabled before booting to Legacy OS. The default value is
Aways Enable, which means that Legacy Console Redirection is enabled for
Legacy OS. Configuration options: [Always Enable] [BootLoader]