Asus Z9PE-D16-10G/DUAL - Manual (Page 52)

2-32 Chapter 2: Hardware information
2.8 Connectors
2.8.1 Rear panel connectors
1. PS/2 mouse port (green). This port is for a PS/2 mouse.
2. RJ-45 port for iKVM. This RJ-45 port functions only when you install ASMB6
management card.
3. Video Graphics Adapter port. This port is for a VGA monitor or other VGA-compatible
devices.
4. SFP+_LED1. This has two LEDs that indicates the link status and the link speed of the
SFP+_1 port. Refer to the table below for the SFP+ LED indications.
5. SFP+_1. This port is for connecting the enhanced small form-factor pluggable (SFP+)
module. SFP+ is an enhanced version of the SFP that supports data rates up to 10
Gbps.
6. SFP+_LED2. This has two LEDs that indicates the link status and the link speed of the
SFP+_2 port. Refer to the table below for the SFP+ LED indications.
7. SFP+_2. This port is for connecting the enhanced small form-factor pluggable (SFP+)
module. SFP+ is an enhanced version of the SFP that supports data rates up to 10
Gbps.
The Z9PE-D16-10G/DUAL have SFP+_1, SFP+_2, SFP+_LED1, and SFP+_LED2. Z9PE-
D16-10G/SINGLE only have SPF+_1 and SFP+_LED1.
SFP+_LED indications
SFP+ LED
SPEED LED
Activity LED
Activity LED Speed LED
Status Description Status Description
OFF No activity OFF -
BLINKING Data activity AMBER 1 Gbps connection
GREEN 10 Gbps connection