Asus Z9PE-D16-10G/DUAL - Manual (Page 58)

2-38 Chapter 2: Hardware information
6. SFP+12 LED connector (5-1 pin LAN34_LED1)
These leads are for 10G LAN activity LEDs on the front panel. Connect the LAN LED
cable to the backplane for LAN activity indication.
7. Power Supply SMBus connector (5-pin PSUSMB1)
This connector allows you to connect SMBus (System Management Bus) to the power
supply unit to read PSU information. Devices communicate with an SMBus host and/or
other SMBus devices using the SMBus interface.
This connector functions only when you install the ASUS ASMB6.
The Z9PE-D16-10G/SINGLE only have SFP+_1 LED connector. Z9PE-D16-10G have
SPF+_1/2 LED connector.