Asus Rampage II Gene - Manual (Page 66)

2.7.4 Installing I/O shield and LCD Poster
2. Orient the motherboard and install
it to the chassis. Ensure that the
motherboard external ports fit the
shield openings.
1. Install the I/O shield to the
chassis by snaping it in place
from inside.
3. Thread the LCD Poster cable
through the back I/O shield
opening until the stopper fits the
opening.
4. Locate and connect the LCD
Poster cable to the LCD_CON
connector.
5. Place the LCD Poster on the
chassis or to wherever you like.
2-42 Chapter 2: Hardware information