Asus Rampage II Gene - Manual (Page 84)

3-14 Chapter 3: BIOS setup
3.3.10 CPU Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode. Set to [Disabled] to follow Intel
specifications, or to [Enabled] to improve CPU VDroop directly.
Configuration options: [Auto] [Disabled] [Enabled]
3.3.11 QPI Load-Line Calibration [Disabled]
Allows you to select the QPI Load-Line mode. Set to [Disabled] to follow Intel
specifications, or to [Enabled] to improve QPI VDroop directly.
Configuration options: [Disabled] [Enabled]
3.3.12 CPU Differential Amplitude [Auto]
Different AMP might enhance BCLK overclocking ability.
Configuration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
3.3.13 NB OCP [Enabled]
This item allows you to enable or disable the NorthBridge over current protect
function. Configuration options: [Disabled] [Enabled]
3.3.14 DRAM OCP [Enabled]
This item allows you to enable or disable the DRAM over current protect function.
Configuration options: [Disabled] [Enabled]
3.3.15 Extreme OV [Disabled]
When set to [Enabled], you can choose high level voltage to overclock, but not
guaranteed CPU life. Configuration options: [Disabled] [Enabled]
The following eight (8) items are adjusted by typing the desired values using
the numeric keypad and press the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
3.3.16 CPU Voltage [Auto]
Allows you to select the CPU VCore voltage. The text color in the configuration
field corresponds to the onboard CPU LED color, both of which indicate voltage
condition. When you set the CPU LED Selection item to [Vcore], the onboard
CPU LED displays CPU VCore voltage condition. Refer to page 2-2 for CPU LED
definition. The values range from 0.85000V to 2.50000V with a 0.00625V interval.
The CPU voltage could be set only up to 1.8V when the Extreme OV item is set
to [Disabled].