Asus Rampage II Gene - Manual (Page 94)

3-24 Chapter 3: BIOS setup
*Intel(R) SpeedStep(TM) Tech [Enabled]
When set to [Disabled], the CPU runs at its default speed. When set to [Enabled],
the CPU speed is controlled by the operating system.
Configuration options: [Disabled] [Enabled]
*Intel(R) TurboMode tech [Enabled]
Turbo mode allows processor cores to run faster than marked frequency in specific
condition. Configuration options: [Disabled] [Enabled]
Intel(R) C-STATE Tech [Disabled]
Allows you enable or disable the Intel ® C-STATE Technology. When enabled, the
CPU idle is set to C2/C3/C4. Configuration options: [Disabled] [Enabled]
The following item appears only when you set Intel(R) C-STATE Tech to
[Enabled].
C State package limit setting [Auto]
Allows you to select the C State package limit setting.
Configuration options: [Auto] [C1] [C3] [C6] [C7]
3.5.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Intel VT-d Configuration
Intel VT-d [Disabled]
Allows you to enable or disable the Intel Virtualization Technology for
Directed I/O. Configuration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Advanced
Advanced Chipset Settings
WARMING: Setting wrong values in below sections
may cause system to malfunction.
Intel VT-d Configuration
BIOS SETUP UTILITY
Advanced
Intel VT-d Configuration
Intel VT-d [Disabled]
Intel Virtualization
Technology for
Directed I/O.