Asus RS160-E2 - Manual (Page 105)

A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 6 - 7 6 - 7 6 - 7 6 - 7 6 - 7
6. Select the stripe size from the
menu, then press <Enter>.
For server systems, we recommend that you use a lower array block
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array block size for optimum
performance.
7. When prompted, use the keyboard to assign a name for the RAID 0 set,
then press <Enter>.
8. If you want to make the array
bootable, select Y e s
Y e s Y e s Y e s Y e s from the
menu, then press <Enter>.
9. When prompted to create the RAID
0 set, select <Yes>, then press
<Enter>.
A B u i l d C o m p l e t e B u i l d C o m p l e t e B u i l d C o m p l e t e B u i l d C o m p l e t e B u i l d C o m p l e t e message
appears to indicate that you have
successfully created the RAID 0
set.
The utility erases all data from the selected hard disk drives. Make
sure to backup all important data before creating a RAID set.