Asus RS160-E2 - Manual (Page 87)

A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 A S U S R S 1 6 0 - E 2 / C S 3 5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7 5 - 2 7
5.5 Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM) features. Select an item then press
<Enter> to display the configuration options.
5.5.1 5.5.1 5.5.1 5.5.1 5.5.1 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
5.5.2 5.5.2 5.5.2 5.5.2 5.5.2 APM Configuration APM Configuration APM Configuration APM Configuration APM Configuration
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Include ACPI APIC
table pointer to RSDT
pointer list.
IMPORTANT!
Do not change the APIC
support settings after
OS installation;
otherwise, a system
boot failure may
occur.
APM Configuration
Power Management/APM [Enabled]
Video Power Down Mode [Disabled]
Hard Disk Power Down Mode [Disabled]
Suspend Time Out [Disabled]
Throttle Slow Clock Ratio [50%]
Power Button Mode [On/Off]
Restore on AC Power Loss [Last State]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Power On Ring [Disabled]
Power On By PME# [Disabled]
Power On By RTC Alarm [Disabled]
Enable or disable
APM.