Asus RS160-E2 - Manual (Page 50)

C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n C h a p t e r 4 : M o t h e r b o a r d i n f o r m a t i o n 4 - 6 4 - 6 4 - 6 4 - 6 4 - 6
5 . 5 . 5 . 5 . 5 . K e y b o a r d p o w e r ( 3 - p i n K B P W R 1 ) K e y b o a r d p o w e r ( 3 - p i n K B P W R 1 ) K e y b o a r d p o w e r ( 3 - p i n K B P W R 1 ) K e y b o a r d p o w e r ( 3 - p i n K B P W R 1 ) K e y b o a r d p o w e r ( 3 - p i n K B P W R 1 )
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
6 . 6 . 6 . 6 . 6 . G i g a b i t L A N 1 c o n t r o l l e r s e t t i n g ( 3 - p i n L A N 1 _ E N 1 ) G i g a b i t L A N 1 c o n t r o l l e r s e t t i n g ( 3 - p i n L A N 1 _ E N 1 ) G i g a b i t L A N 1 c o n t r o l l e r s e t t i n g ( 3 - p i n L A N 1 _ E N 1 ) G i g a b i t L A N 1 c o n t r o l l e r s e t t i n g ( 3 - p i n L A N 1 _ E N 1 ) G i g a b i t L A N 1 c o n t r o l l e r s e t t i n g ( 3 - p i n L A N 1 _ E N 1 )
This jumper allows you to enable or disable the Intel
® 82547GI Gigabit
LAN controller (CSA) that controls the LAN1 port. Place a jumper cap
on pins 1-2 to activate the Gigabit LAN1 controller.
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
®
NCL-DSR1
NCL-DSR1 Keyboard power setting
KBPWR1
(Default)
+5V +5VSB
1 2 2 3
®
NCL-DSR1
NCL-DSR1 LAN1_EN setting
LAN1_EN1
Enable
(Default) Disable
3
2 2
1