Asus RS300-H8-PS12 - Manual (Page 158)

7-10 Chapter 7: Driver installation
Red Hat ® Enterprise Linux OS 6.x
To install the LSI MegaRAID controller driver when installing Red Hat ® Enterprise OS:
1. Boot the system from the Red Hat ® OS installation CD.
3. While booting from DVD, press <ESC> to provide the third party driver. Enter the following
command at the boot:
Linux dd then press <ENTER>.
4. Insert the Red Hat ® Enterprise RAID driver disk into the USB floppy disk drive.
Write-protect the floppy disk to avoid computer virus infection.
If the Red Hat ® Enterprise RAID driver is stored in a USB flash drive, insert the USB flash
drive into an available USB port.