Asus RS162-E4/RX4 - Manual (Page 100)

Chapter 5: BIOS setup -
v02.58 (C) Copyright 1985-2004, American Megatrends, Inc.
Hardware Monitor
CPU1 Domain 0 Temperature 47 ℃/116℉
CPU1 Domain 1 Temperature 52 ℃/125℉
CPU2 Domain 0 Temperature N/A
CPU2 Domain 1 Temperature N/A
SYSTEM 1 Temperature 26 ℃/78℉
SYSTEM 2 Temperature 31 ℃/87℉
FAN1 2925 RPM
FAN2 667 RPM
FAN3 667 RPM
FAN4 667 RPM
FAN5 667 RPM
FAN6 667 RPM
FAN7 667 RPM
FAN8 667 RPM
Smart Fan Control [Smart Fan II]
Item Specific Help
W h e n t h e c u r r e n t
temperature equals
this limit, the fan
will be turned on IF
it is not already.
F1 ：Help ↑↓ Select Item -/+ Change Values F9：Setup Defaults
ESC ：Exit →← Select Menu Enter Select Sub-menu F10：Save and Exit
PhoenixBIOS SETUP UTILITY
Advanced
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
The following items appear only if you enable the Power On By RTC
Alarm item.
RTC Alarm Date [0]
To set the date of alarm, highlight this item and press <Enter> to display
a date chart. Press <+> or <-> to change scroll through the options, then
press <Enter> when done. The default setting [0] is equivalent to everyday
alarm. Configuration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press <Tab> to move to the next field.
3. Press <Enter> when done.
5.4.8 Hardware Monitor
This menu shows the hardware monitor configuration settings. Select an
item then press <Enter> to display the configuration options.