Asus RS162-E4/RX4 - Manual (Page 31)

ASUS RS162-E4/RX4 -1
2.5 Expansion slots
2.5.1 Installing expenstion card
ASUS RS162-E4/RX4 sever has a specially designed PCI riser card. If you
want to install PCI-X and PCI Express x8 expension cards, you have to
remove the mental brackets on the real panel of the chassis first.
To install the PCI-X card: (the slot support PCI-X or 3.3V campatiable PCI
cards.)
1. You can install one PCI Express
x8 card and one PCI-X card.
Please carefully hold the PCI-X
riser card and pull it off from the
PCI-X slot on the board.
2. Set the riser card aside. Using a
cross screw driver to remove the
screws as shown.
3. Insert a PCI-X card into the slot
of the riser card, then put the
screws back and fasten it.