Asus RS162-E4/RX4 - Manual (Page 95)

ASUS RS162-E4/RX4 -
PCI Configuration
Reset Configuration Data [No]
Plug & Play OS [No]
Palette Snooping [Disabled]
PCI Device, Slot #1
PCI Device, Slot #2
PCI Device, Slot #3
Item Specific Help
Select 'Yes' if you
want to clear the
E x t e n d e d S y s t e m
Configuration Data
(ESCD) area.
F1 ：Help ↑↓ Select Item -/+ Change Values F9：Setup Defaults
ESC ：Exit →← Select Menu Enter Select Sub-menu F10：Save and Exit
PhoenixBIOS SETUP UTILITY
Advanced
5.4.3 PCI Configuration
This menu shows the PCI configuration settings. Select an item then press
<Enter> to display the configuration options.
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data
(ESCD) area. Configuration options: [No] [Yes]
Plug And Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]
PCI Device, Slot #1/#2/#3
Option ROM Scan [Enabled]
Configuration options: [Disabled] [Enabled]
Take caution when changing the settings of PCI PnP menu items.
Incorrect field values can cause the system to malfunction.