Asus WL-300g - Manual (Page 22)

3. Software
22 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
WLAN Utilities
Note: If you cannot find any the
ASUS 802.11g APs due to a
problem in the IP settings, push
and hold the “Restore” button
on the ASUS 802.11g AP over
five seconds to restore factory
default settings.
Restart your Windows if you are
asked to.
Restore
User Name and Password
Once connected, a window will ask for
the User name and Password in order
to log in. The factory default values are
“admin” and “admin”.
Home Page
After logging in, you will see the ASUS 802.11g AP home page. The default
pages will be for the Access Point mode. Router and Home Gateway modes
are described later in this manual.