Asus WL-300g - Manual (Page 24)

3. Software
24 ASUS 802.11g Access Point
Chapter 3 - Software Configuration
Access Point
Quick Setup
Click Next to enter the Quick Setup page. Follow the
instructions to setup the ASUS 802.11g AP. Tips are given
when you move your cursor over each item.
Configure Wireless Interface
First step to set your wireless
interface is to give it a name, called
SSID. In addition, if you would like
to protect transmitted data, please
select Security Level as Medium or
High. Selecting Medium allows only
those users who use the same WEP
key to connect to this access point
and to transmit data with 64-bit or
128-bit WEP encryption. Selecting
High allows only those users who use
the same WPA pre-shared key to
connect to this access point and to
transmit data with TKIP encryption.
(See next few pages for item
descriptions.)
If you would like to perform other
settings, click an item on the menu
to reveal a sub menu. Follow the
instructions to setup the ASUS
802.11g AP. Tips are given when you
move your cursor over each item.