Asus WL-300g - Manual (Page 33)

3. Software
ASUS 802.11g Access Point 33
Chapter 3 - Software Configuration
Access Point
Wireless
Click this item on the menu to reveal a sub menu. Follow the
instructions to setup the ASUS 802.11g AP. Tips are given
when you move your cursor over each item.
RADIUS Setting
Note: Click the “Finish” button to save your new settings and re-
start the ASUS 802.11g AP or click “Save” and restart later.
This section allows you to set up additional parameters for connection with
RADIUS Server. It is required while you select “Authentication Method”
as “WPA” or “Radius with 802.1x” in “Wireless – Interface”.
Server IP Address - This field specifies the IP address of the RADIUS
server to use for 802.1X wireless authentication and dynamic WEP key
derivation.
Server Port - This field specifies the UDP port number used by the RADIUS
server.
Connection Secret - This field specifies the password used to initialize a
RADIUS connection.