Armasight NSMAVENGE3GGDA1 AVENGER Gen 3 Ghost Night Vision Monocular - Manual (Page 9)

9
When stored, the Avenger should be protected from exposure to direct sunlight or extreme tempera-
tures.
MOnOculAR clEAnIng PROcEDuRES
1) Gently remove any dirt from the monocular’s body using a clean, soft cloth.
2) Wipe external surfaces down (with the exception of optical surfaces) with a clean cloth moistened
with pure water.
3) Dry all wet surfaces with a different clean, dry cloth.
4) Using a lens brush, carefully remove any dirt from the optical surfaces.
5) To avoid scratches, optical surfaces must be cleaned using a clean cotton swab that has been slight-
ly dampened with pure alcohol. The glass should be wiped in circular motions starting from the center
and moving out towards the edge, without touching the barrel. Change the cotton swab as soon as it
becomes dirty.
PREPARATIOn FOR STORAgE
When preparing your Avenger for storage, perform the following steps:
1) Verify that the monocular is operating in accordance with all previously specified procedures.
2) Remove the battery from the battery compartment.
3) Clean the monocular and all accessories.
4) Place all components into the storage case.
cAuTIOn:
Each component of the unit should be thoroughly dried before placing them into the storage
case.