5 mounting an ir illuminator to the nyx-7 – Armasight NSGNYX7001GGDA1 Nyx7 GEN 3+ Ghost Night Vision Goggles User Manual
Page 20
Advertising
20
NOTE:
The unit may be badly damaged if the tripod collapses or overturns. Remove the unit from the
tripod if it is not within your reach.
3.1.5 MOUNTING AN IR ILLUMINATOR TO THE NYX-7
To mount an IR illuminator to the Nyx-7, use the transfer piece from IR illuminator kit. Perform the fol-
lowing steps:
1. Install the transfer piece (A) onto the Nyx-7 rail.
2. Tighten the fixing screw (B) on the transfer piece.
3. Loosen the IR illuminator fixing screw (C).
4. Mount the IR illuminator on the rail of adapter and tighten the fixing screw (C).
FIGURE 3-5. MOUNTING AN IR ILLUMINATOR TO THE NYX-7
A
C
B
Advertising
This manual is related to the following products: