Armasight NSGNYX7001GGDA1 Nyx7 GEN 3+ Ghost Night Vision Goggles - Manual (Page 21)

21
3.2 CONTROLS AND INDICATORS
The Nyx-7 controls and indicators are defined in Table 3-1.
The Nyx-7 controls are shown in Figure 3-6.
CAUTION:
DO NOT over-adjust the controls by forcing them past their stopping points.
FIGURE 3-6. NYX-7 CONTROLS
C
A
B
TABLE 3-1. NYX-7 CONTROLS AND INDICATORS
CONTROL/INDICATOR FUNCTION
Operating Button
(Figure 3-14, A) Controls unit power and built-in IR illuminator.
To turn unit on and off push the button by short press (less than 1.5 sec).
To turn the IR illuminator on and off push the button by long press (more
than 1.5 sec).
Eyepiece Rings
(Figure 3-14, B) Adjusts the unit diopter. The total dioptric range is covered in a 1/2 ring
revolution.
Focusing Ring
(Figure 3-14, C) Focuses the lens. Adjusts for sharpest view of the scene. The total focus
range is covered in a 1/3 ring revolution.
Built-in LED Indicators A PERMANENT RED GLOW in the eyepiece viewing area indicates that the
IR illuminator is operating.
A FLASHING RED LIGHT in the eyepiece viewing area indicates that the
battery is low.